主要成分:
水性硅醇盐
适用范围:
适用于各种吸水率高的石材和人造石材,如砂岩、花岗岩、大理石、石灰石。
性能特点:
1、优异的附着性能
2、良好的透气性
3、经久的柔软性和回弹性处理后石材表面颜色会增强
4、耐紫外线,耐化学品辐蚀(酸和碱)
注意事项:
1、石材表面尽可能干燥,否则会影响界面剂的附着力
2、石材表面温度底于4度,不宜施工
3、喷枪应配有耐溶剂的软管和垫圈
4、不用时须锁紧瓶盖,暴露在空气中可能使其在容器中固话
5、存放于通风干燥的地方,防止阳光直射,运输和储存温度在5度以上
Ingredients:
Aqueous silicon alkoxide
Scope:
For a variety of natural and man-made high water absorption stone, such as sandstone, granite, marble, limestone.
Features:
1, excellent adhesion properties
2, good air permeability
3, excellent long-lasting softness and resilience of stone surface color will enhance
4, UV-resistant, corrosion-resistant chemical radiation (acid and alkali)
Precautions:
1, the stone surface as dry as possible, otherwise it will affect the adhesion of the interface agent
2, the end of the stone surface temperature at 4 degrees, not construction
3, the gun should be equipped with solvent resistant hoses and gaskets
4, must be locked when not in caps, exposure may make it fixed in a container in the air
5, stored in a ventilated, dry place to prevent direct sunlight, transport and storage at temperatures above 5 degrees.
- 上一篇:湿板可施工防护剂
- 下一篇:KT-109全效氟硅型